PANDUIT: Electrical Full Line

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) ELECTRICAL SOLUTIONS C1.47 B2. Cable Accessories C1. Wiring Duct C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers F. Index B3. Stainless Steel Ties C2. Surface Raceway E5. Lockout/ Tagout & Safety Solutions B1. Cable Ties A. System Overview D3. Grounding Connectors E4. Permanent Identification Panduct ® Wiring Duct and Raceway – Material Specifications Note: To the best of our knowledge the above information is accurate. Panduit assumes no liability for the accuracy or completeness of this information. Rigid Polyvinyl Chloride (PVC) A general purpose material for use in indoor applications. PVC has a UL 94 flammability rating of V-0 and is UL Recognized for continuous use temperatures up to 122°F (50°C). PVC is an economical wiring duct material. Halogen-Free (Modified Polyphenylene Oxide) A special purpose material for use in halogen-free or high temperature applications. Modified PPO has a UL 94 flammability rating of V-0 and is UL Recognized for continuous use temperatures up to 203°F (95°C), and is 20% lighter than PVC. Polypropylene A flexible material with a UL 94 flammability rating of V-2 and UL Recognized for continuous use temperatures up to 149°F (65°C). Properties Units Test Method Lead-Free PVC Halogen-Free Modified PPO (NNC, NE) Polypropylene (FL) General Specific gravity g/cc ASTM D 792 1.45 1.09 0.95 Heat deflection temperature @264 psi °F ASTM D 648 156 215 117 Thermal expansion 10-5 in/in/°F ASTM D 696 3.7 3.8 N/A Thermal conductivity (BTU-in/hr-ft²)°F ASTM C 177 1.3 1.3 N/A Burning Characteristics Flammability class — UL 94 V-0 V-0 V-2 Smoke density @ 4 minutes — ASTM E 662 538 513 N/A Limited oxygen index (LOI) — ASTM D 2863 35 30 25 Peak heat release rate kW/m2 ASTM E 1354 N/A N/A N/A Hardness Durometer hardness "D" ASTM D 2240 78 N/A N/A Rockwell hardness "R" ASTM D 785 111 116 N/A Tensile Yield Strength psi ASTM D 638 6,200 7,700 3,770 Modulus psi ASTM D 638 390,000 350,000 172,000 Flexural Yield Strength psi ASTM D 790 8,700 11,500 4,350 Modulus psi ASTM D 790 325,000 340,000 181,250 Impact strength Notched Izod (.125") 23°C (73°F) ft-lb/in ASTM D 256 4.0 5.0 1.8 0°C (32°F) ft-lb/in 1.6 2.0 N/A Electrical Properties Power factor: 60 Hz @30°C (86°F) — ASTM D 150 2.90 N/A N/A 1 MHz @30°C (86°F) — 4.00 N/A N/A Dielectric constant: 60 Hz @30°C (86°F) — ASTM D 150 3.90 N/A N/A 1 MHz @30°C (86°F) — 3.30 N/A N/A Dielectric strength: Unconditioned volts/mil ASTM D 149 690 N/A N/A Conditioned volts/mil 700 N/A N/A